In stock with us 1 unit ready to ship from our own stock — buy now or ask us for a volume price.

TTI Make an offer

TSX3510

Aim-TTi (Thurlby Thandar) TSX3510 Precision DC Power Supply, 0-35 V / 0-10 A, 350 W

Category Other Power Supplies, UPS & Energy

Unit: pcs

PN (normalized): TSX3510

In stock 1 (Used)

Make an offer

1 unit in stock

Name your own price for this item — we'll reply here.

Offers and prices are non-binding until an order is placed and confirmed.

Price barometer

Good price

Market now · $80.39

Low $80.39 High $1,434.00

Where the market price sits in its range over the last 12 months.

Available units (1)

About the TSX3510

The TSX3510 is a single-output bench DC power supply from Thurlby Thandar Instruments (now Aim-TTi), adjustable from 0 to 35 V at 0 to 10 A.

It uses mixed-mode regulation (switch-mode combined with linear) for high efficiency, low noise (typically under 1 mV rms) and a fast transient response, and it is cooled by convection without a fan. Voltage is set with coarse and fine knobs to within 10 mV, and current with a semi-logarithmic knob. The output switches between constant voltage and constant current automatically. Two 4-digit LED meters show voltage and current, and the panel has buttons to read the OVP level, check the V/I settings and damp the current meter.

Protection covers over-voltage trip (adjustable 10-110% of full scale), regulator over-temperature and sense miswiring. Remote sense is on rear screw terminals. The steel case is half rack width and 3U high, and a rack kit is available. This unit is the analogue TSX (Series I) version; the TSX3510P is the programmable model, and Aim-TTi replaced Series I with the nearly identical Series II in 2017.

Frequently asked questions

Is the TSX3510 programmable?

No. The TSX3510 has analogue front-panel controls and no remote interface. The TSX3510P is the programmable version.

How does it differ from the TSX1820?

Same case, controls and features. The TSX3510 gives 0-35 V at up to 10 A, and the TSX1820 gives 0-18 V at up to 20 A.

Which version is this, Series I or Series II?

Series I. Aim-TTi says Series II replaced it in 2017 and is nearly identical; Series I has 4 mm binding posts on the front and a mains voltage selector on the rear, while Series II has shrouded safety terminals.

Does it need a fan or forced cooling?

No. It is convection cooled and runs silently.

Documents

TSX Series II DC power supplies data sheet, issue 3 (Aim-TTi; current successor version)
Datasheet · English · resources.aimtti.com
TSX Series (Series I) instruction manual, issue 16 (Aim-TTi)
Manual · English · resources.aimtti.com

Specifications

Meters	Dual 4-digit LED; 10 mV / 10 mA resolution; 0.2% (V) and 0.5% (I) of reading ±1 digit
Weight	5 kg
AC input	110-120 V or 220-240 V AC ±10%, 50/60 Hz; 600 VA max
Regulation	Mixed-mode (switch-mode pre-regulator with linear post-regulator), convection cooled without fan
Output power	Over 350 W (single output)
Output current	0-10 A
Output voltage	0-35 V
Operating modes	Constant voltage / constant current with automatic crossover
Setting controls	Coarse and fine voltage (10 mV resolution); semi-logarithmic current (10 mA resolution)
Size (W x H x D)	210 x 140 x 385 mm (half rack width, 3U)
Transient response	20 µs to within 50 mV (5% to 95% load change)
Outputs and sensing	4 mm front terminals, rear screw terminals with remote sense
Ripple and noise (CV)	<1 mV rms typical
Over voltage protection	Trip, adjustable 10% to 110% of maximum voltage from the front panel
Load and line regulation	<0.01% of maximum output (90% load change or 10% line change)

Price History Price overview

Loading…

Available Offers

How many offers there are, their price ranges and how recent they are. Free: signing in with a new email creates your account.

Attribute

Actions