M Transceivers

SFP-SX Extended Temperature 1000BASE-SX SFP 850nm LC Connector Pluggable GbE XCVR

SFP-LX Extended Temperature 1000BASE-LX SFP 1310nm LC Connector Pluggable GbE XCVR

1000Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at 1000 Mbit/s speed and full-duplex mode. Supports 10/100/1000 Mbit/s as well when combined with OS6850-U24X and OS6400-U24.

SFP-GIG-SX transceiver for K-12 Education Accounts Only.

1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on 62.5/125 µm MMF or 550m on 50/125 µm MMF.

SFP-GIG-LX transceiver for K-12 Education Accounts Only.

1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on 9/125 µm SMF.

1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on 9/125 µm SMF.

10 Gigabit optical transceiver (SFP+) with an LC type of interface.This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1270 nm and receives 1330 nm optical signal.

10 Gigabit optical transceiver (SFP+) with an LC type of interface.This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1330 nm and receives 1270 nm optical signal.

10 Gigabit direct attached copper cable (1m, SFP+)

10 Gigabit direct attached copper cable (3m, SFP+)

60 cm copper cable with pre-equipped SFP+ transceivers

10 Gigabit direct attached copper cable (7m, SFP plus)

10 Gigabit CWDM transceiver (SFP+ MSA) with an LC type of interface. Supports single mode fiber over 1551nm wavelength. Typical reach of 40Km.

10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km

Dual-speed SFP+ optical transceiver. Supports monomode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10Km. Supports 1000BASE-LX and 10GBASE-LR.

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports 1000BaseSX and 10GBASE-SR

10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10Km

SFP-10G-LR transceiver for K-12 Education Accounts Only.

10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 220m on FDDI-grade (62.5µm)

10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m

SFP-10G-SR transceiver for K-12 Education Accounts Only.

10 Gigabit copper transceiver (SFP+). 10GBase-T 10 Gigabit ethernet Transceiver (SFP MSA) - Supports category 6a/7 cabling copper cabling up to 30m. This tranceiver supports 10Gbs full-duplex mode only.

10 Gigabit industrial optical transceiver (SFP+). Supports data transmission at 1550nm over up to 80km single mode fiber. LC connector type.

SFP-1G-T: Fixed speed 1000Base-T Gigabit Ethernet Transceiver SFP MSA Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works only at 1000 Mbit/s speed and fullduplex mode.

25 Gigabit direct attached active optical cable (SFP28, 20m)

25 Gigabit direct attached copper cable (SFP28, 1m)

25 Gigabit direct attached copper cable (SFP28, 3m)

25 Gigabit direct attached copper cable (SFP28, 5m)

25 Gigabit optical transceiver (SFP28). Supports link lengths of 2Km over singlemode fiber cables. Single MPO

25 Gigabit optical transceiver (SFP28). Supports link lengths of 10Km over singlemode fiber cables. Single MPO