M Transceivers

SFP-SX Extended Temperature 1000BASE-SX SFP 850nm LC Connector Pluggable GbE XCVR

SFP-LX Extended Temperature 1000BASE-LX SFP 1310nm LC Connector Pluggable GbE XCVR

1000Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at 1000 Mbit/s speed and full-duplex mode. Supports 10/100/1000 Mbit/s as well when combined with OS6850-U24X and OS6400-U24.

SFP-GIG-SX transceiver for K-12 Education Accounts Only.

1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on 62.5/125 µm MMF or 550m on 50/125 µm MMF.

SFP-GIG-LX transceiver for K-12 Education Accounts Only.

1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on 9/125 µm SMF.

1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on 9/125 µm SMF.

100 Gigabit optical transceiver (QSFP28). Supports link lengths of 10Km over singlemode fiber cables. Single MPO

100 Gigabit optical transceiver (QSFP28). Supports link lengths of 70m on OM3 and 100m on OM4 multimode fiber cables. Single MPO

40 Gigabit QSFP+ direct attached active optical cable. 20 m.

40 Gigabit direct attached copper cable (1m, QSFP+)

40 Gigabit direct attached copper cable (3m, QSFP+)

40 Gigabit direct attached copper cable (40 cm, QSFP+).

40 Gigabit direct attached copper cable (7m, QSFP+)

Four channel 40 Gigabit optical transceiver (QSFP+). Supports single mode fiber. Typical reach 2 km. Duplex LC receptacles.

40 Gigabit optical transceiver (QSFP+ MSA). Supports single mode fiber. Typical reach 40 km. Duplex LC receptacles

Four channel 40 Gigabit optical transceiver (QSFP+). Supports single mode fiber over 1310nm wavelength. Typical reach 10 km. Duplex LC receptacles

Four channel 40 Gigabit optical transceiver (QSFP+). Supports link lengths of 100m and 150m respectively on OM3 and OM4 multimode fiber cables. Single MPO receptacle

Dual channel 40 Gigabit optical transceiver (QSFP+). Supports multimode fiber with duplex LC connector. Supports link lengths up to 100 meters on OM3 MMF or 150 meters on OM4 MMF.

40 Gigabit to 4 x 10 Gigabit direct attached copper splitter cable (1m, QSFP+)

40 Gigabit to 4 x 10 Gigabit direct attached copper splitter cable (3m, QSFP+)

40 Gigabit to 4 x 10 Gigabit direct attached copper splitter cable (5m, QSFP+)

40 Gigabit to 4 x 10 Gigabit Multifiber Push-On (MPO) fiber splitter transceiver

100 Gigabit QSFP28 to 4x25 Gigabit SFP28 direct attached splitter copper cable, 1m

100 Gigabit QSFP28 to 4x25 Gigabit SFP28 direct attached splitter copper cable, 3m

100 Gigabit QSFP28 to 4x25 Gigabit SFP28 direct attached splitter copper cable, 5m

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits 1550nm and receives 1310nm optical signal

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits 1310nm and receives 1550nm optical signal

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic cable.

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.